327-CUBE 1967 CHEVROLET RS CAMARO

chevrolet camaro 2

George Anastasiou's 1967 RS Camaro is the immaculate head-turner he knew he'd own since he was 12 years old

This article on George's Camaro was originally published in the September 2017 issue of Street Machine

George located his ’67 RS in the States as a restored, matching-numbers, two-owner car. “It was a clean body with no rust, the interior was a great colour and in top condition, plus the previous owner photographed the complete resto, which was the key to my purchase.”

Chevrolet RS Camaro onroad“We wanted to accentuate the body lines, with a few subtle modifications for our interpretation on how a ’67 would roll off the line today,” George says. “We didn’t want to bling it up; instead just let the body do the talking”

The car landed in Oz in 2011, and headed straight to Mike McCrudden at Glenlyon Motors in Brunswick East, Victoria. “George arrived with a reasonably original, unmolested Camaro. He had a wishlist, but it then grew,” Mike laughs. “I said to George, if you leave it LHD everyone will think that you bought it like that. Make it RHD and people are going to know that you built it.”

Elite-level 1500hp twin-turbo 1969 Camaro

Chevrolet RS CamaroMiles Johnston crafted a pair of mesh inserts for the stone tray holes, which creates a visual diversion from the missing front bar. It’s a simple and effective nod to the pro tourer style 

The inevitable snowball ensued. “I just got deeper and deeper, so I went pretty much the whole hog,” George says.

Chevrolet RS Camaro sideOver the next five years, Mike became the custodian of the RS, adding his expertise and calling in other professionals where needed. “Overall we agreed that the objectives were neat, hidden and tough,” George says. “Mike made lots of custom-engineered parts. He has a great attention to detail and we were pretty much on the same page.”

800hp Pro-touring LSX '69 Camaro

Chevrolet RS Camaro wheelMike and the lads at Glenlyon Motors stripped the Camaro of every last nut and bolt before embarking on the rebuild, which included the RHD conversion, a flat firewall and a heap of 
performance upgrades, starting with the clapped-out SBC.

Mick Glenlyon“People need to be dedicated to the car and the build process,” Mike says of his clients. “It’s the last few months that customers get itchy feet, as the final 10 per cent can take as long as the 90 percent; it looks finished, it even drives, but it’s not yet refined”

“We rebuilt the factory block so it’s still matching-numbers, even though nothing inside is original,” Mike says. First it copped a balance and blueprint thanks to Donnie at Wellco 
Engine Reconditioning. Mike then added the go-fast bits. Up top is a Holley 650 DP feeding an Edelbrock Performer Air-Gap manifold through to Trick Flow heads packed with Trick Flow 
lifters, pushrods, valves and springs. Below is a same-brand 284/290 cam. Mahle forged pistons pinned to six-inch Scat I-beams swing off a forged crank. “We believe it’s good for 420- 
440fwhp – a bit of punch, but nothing stupid. It gets to 6500rpm pretty quick,” George smiles.

Chevrolet RS Camaro engine bayUnder the bonnet, the guys opted for a minimalist look. Frank Campisi rewired the car, hiding the mess of spaghetti in the process. “If I can figure out a way to get rid of the water hose and accelerator cable, I will!”  George says. The Glenlyon lads also flattened the firewall, relocating the wiper motor and heater behind the dash 

Behind that, George opted to bin the ’Gilde that it arrived with, opting for a rebuilt, factory-style M21 crunch box. The Glenlyon fellas reconditioned the ’box with new gears, keeping 
the factory ratios. Further back, they beefed up the 8.5-inch GM 10-bolt with 3.7 Richmond gears, Truetrac centre and 31-spline axles.

Chevrolet RS Camaro engineUnderneath, Mike added Hotchkis sub-frame connectors and sway-bars for rigidity. QA1 adjustable coil-over fronts and a Hotchkis leaf-spring rear take care of the ride comfort, while 
braking is now thanks to Wilwood four-spot calipers and discs up front with the original GM drums at the back. George opted to roll on 17-inch American Racing rims. “The only bling on 
the outside of car is the wheels,” he says.

engine plaqueIf Mike whips you up a full rebuild, you get a li’l under-bonnet plaque. Build #2, by the way, is the stunning orange Torana SM gave away last year, but George’s Camaro got into Glenlyon Motors first, having called shotgun five years ago 

Outside, the hue is close to standard, with a modern twist. “The original GM colour is Deepwater Blue, a rare option at the time,” George says. “I wanted to keep the same combo as the 
VIN number, though I went with Lotus Nightfall Blue, as it has more flake. Rob and Sharee Rowe from Superior Panel Services not only prepped and coated the Camaro, they also went to 
town on the finishing touches to make sure all lines were tight.”

Chevrolet RS Camaro under“While I’ve gone for a pro touring style, I didn’t want tubular control arms with urethane bushes, as I preferred rubber for a more comfortable ride,” George says. “I didn’t want a kidney-slapper!”

Next the RS headed back to Mike for the final fit-up. “The new stainless-steel window trims wouldn’t go on,” Mike says. “So I called Miles Johnston from Thunder Road as he’s probably 
the only bloke I know that can do it. It left us for a six-week trim fit and stayed for six months. Miles is more pedantic than me! He did around 20-30 tiny things that weren’t 10/10 
that came back here perfect.” Amongst the raft of mods are the radiator cover panel and front mesh inserts. Did you even notice it was sans bumper? “Most people don’t realise it is 
missing. The inserts blend in with the nice subtle finish,” George says.

Chevrolet RS Camaro interiorIf you can tear your eyes away from the amazing Deluxe Bright Blue pews, you’ll notice the additions of a Budnik wheel, Ididit column, a couple of extra gauges and the first-gen Camaro Hurst shifter. You won’t notice the RetroSound radio though, as it mimics the original while providing modern features

Inside, the mods are spartan and well-thought-out. The eye-popping original trim remains untouched, accentuated with a Budnik tiller attached to the Ididit column, with a Hurst shifter 
taking centre-stage. 

Chevrolet RS Camaro steering wheelI’d ask George how comfy those seats are, but the photoshoot was his first real drive of the car. “The detail Mike has done to get it driving and reliable is amazing. It starts, stops, 
doesn’t leak and will spin up pretty easily if the foot slips off the clutch. Apart from the paint that’s a bit over-the-top, it’s a fully functioning car,” George enthuses.

Chevrolet RS Camaro shifter“Now I just want to put some kays on it! My boys Max and Alexi were five and six years old respectively when the car arrived from the US. Now they’re 10 and 11, so have spent most of their lives talking about the day we get to cruise the Camaro. I’ve already been offered good money to sell it, yet I can’t envisage doing it as it’s my childhood dream that’s become a reality.”

George AnastasiouGeorge’s lads Max (grey) and Alexi (red) are eager to go cruising in the Camaro that’s taken half of their lives to build 

GEORGE ANASTASIOU
1967 CAMARO RS

Colour: Lotus Nightfall Blue

POWER
Donk: Chevrolet 327ci
Induction: Edelbrock Performer Air-Gap manifold, Holley 650 DP
Heads: Trick Flow Fast As Cast 195
Cam: Trick Flow 284/290 Lifters, pushrods, valves, springs: Trick Flow
Pistons: Mahle forged
Crank: Chev small-journal forged
Conrods: Scat 6in I-beam
Oil pump: Moroso
Sump: Moroso
Comp ratio: 10.5:1 comp
Fuel: PULP
Ignition: MSD
Fuel pump: Holley
Cooling: Custom Aussie Desert Coolers radiator, two 12in fans, Davies Craig controller
Exhaust: 17/8in custom headers, Pypes 2½in stainless-steel system

GEARS
’Box: M21 four-speed
Clutch: Hays
Shifter: Hurst
Diff: GM 10-bolt 8.5in, 3.7 Richmond gears, Truetrac, 31-spline axles

SUSPENSION & BRAKES
Springs: QA1 adjustable coil-overs (f), Hotchkis leaf (r)
Shocks: QA1 adjustable shocks (f & r)
Mods: Hotchkis sub-frame connectors and sway-bars
Steering: Ididit adjustable, matching rack-and-pinion
Brakes: Wilwood four-spot calipers and discs (f), GM drums (r) Master cylinder: GM

ROLLING STOCK
Rubber: Kumho; 215/40/17 (f), 255/50/17 (r)
Rims: American Racing; 17x7 (f), 17x9 (r)

Join the Street Machine newsletter to stay in touch with the latest and greatest!

Looking for a new project? Wanting to sell your unique car? Visit Trade Unique Cars…