In the build: VN Commodore, Datsun 1600, Hyundai Excel, Mercedes-Benz 190E, Nissan 300ZX + Toyota Celica TA22

We check out some of our readers’ project cars from the October issue of Street Machine

Share

CAMERON NORTH
VN COMMODORE

“The VN Group A has always had my attention. The front end just looks so tough – the last of the muscle cars. My own VN build will run a freshly rebuilt LS1 but with a carby to retain some muscle, and a 50hp shot of nitrous.

“Behind it will be a T56, which is currently getting rebuilt, along with the diff. I’ve ordered every single control arm, bush, spring, shock, nut, bolt and washer from front to back for it, while the FE2 lowered shocks and King SSL front and SL rear springs will keep the car safe for driveways. The aim was to build a car for my future wife, Isabel, and name it after her.

“I have just finished removing the existing sound deadener, which was caked on like a cream bun; I only have the rear guards left and to epoxy-prime the newly shaved engine bay. I also have the complete Group A kit from Sydney Special Vehicles to go on the car when it comes time for paint.”

MATT POYZER
DATSUN 1600 WAGON

“This is my Datsun 1600 wagon, which has been in the build for eight years. I found it in a shed in Whyalla, and dragged it back to Adelaide for the resto to begin.

“Michael Falzon is handling the paint and panel, and that’s nearly finished. For power, it’ll be getting an FJ20 turbo stroker that’s being built by the team at Ampl Auto, who will also be doing the wiring, exhaust and tune once the paint is finished.

“Behind the engine will be a brand-new RB25 gearbox. The interior work is being completed by AJ Trim, which will be all original apart from Recaro seats with Houndstooth inserts, and a Haltech dash. I’m hoping to have it done in the next 18 months.”

ADAM BOURNE
HYUNDAI EXCEL

“I work at Excel Garage in South Australia, building the race cars that run all around the country in the Excel Series. While that’s my day job, I wanted my own Excel with a good punch of horsepower.

“So, this is my 1997 Hyundai Excel with an LS1 conversion to rear-wheel drive, backed by a Turbo 350 and a shortened VP Commodore diff in a four-link rear with airbags. I modified VX Commodore front coil-overs and brakes to suit the Excel, and the goal was just to build a tougher shopping car!

“I’ve also got a Hayabusa-swapped Corolla, which was recently featured in In the Build (SM, Feb ’26). I have my own YouTube channel, Cheesy Customs, so you can check out both cars and more there.”

ALESSIA CALABRESE
1991 MERCEDES-BENZ 190E

“I am 21 years old and have been around cars since before I can remember, and a huge dream of mine as a kid was to have a car worthy of being in Street Machine. Growing up, I always loved a naturally aspirated V8, but I also liked the styling of 90s European cars, so that’s why I bought a $1500 190E Mercedes about two years ago.

“The car was rough and needed a lot of TLC to get it running properly, but with some time, I was able to get the stock four-cylinder running healthily, and it was my daily for the past year-and-a-bit. I am an automotive painter by trade, and I’ve actually just opened a shop with my partner, who builds engines.

“Over the Christmas break last year, my bosses gave me an opportunity to have full rein of the workshop and respray the car. I worked 14-hour days for four days straight and pulled off a colour change and full respray, including all the door jambs. I made a custom colour for it, consisting of a black base that flips green, and added magenta, green, blue and purple metallic to make the colour pop in sunlight.

“Now, as much as the four-pot in it is proven, it needed more oomph, and I like a challenge! So, I am currently pulling down a 350 small-block Chevy to rebuild and fit into the car. To pull this off, everything that makes the car drive now needs to be ripped out, swapped out and custom-fabricated.”

DANIEL HARDY
NISSAN 300ZX

“This is my 1986 Nissan 300ZX Z31, which I swapped a rusty Datsun 1600 for. It’s a rarer factory manual and turbo car, with all the futuristic 1980s dash and gizmos.

“I have completely redone the suspension, interior and paint, and I’m currently rebuilding the original VG30ET 3.0L V6.

“It has been an ongoing project since 2016, and she’s getting close to completion!”

ANDREW McCORMICK
TOYOTA CELICA TA22

“My Celica was built by Mick and his team at Street Cred Differentials & Fabrication, with absolutely everything custom made. It has a full custom tube front end with modified Ford struts and forward steering rack, with adjustable lower control arms and billet steering arms. The brakes are 355mm Wilwood front discs, and it also has a Wilwood electric handbrake.

“Power comes from a Honda K20 built by Benny at BYP Racing & Developments. It’s an 800hp-spec build with a Precision 6266 turbo, backed by a six-speed Quaife sequential gearbox with an OS Giken twin-plate clutch. The car made 740hp on 30psi of boost. The set-up uses a custom-designed radiator and heat exchanger built to spec by PWR, along with a Plazmaman water-to-air intercooler. In the rear, it has round-edge tubs and a custom flat boot floor to fit the fuel cell, with a four-link rear end mounting a braced 9in diff. It also has chassis connectors and a full bolt-in chrome-moly rollcage.

“I have two sets of wheels for it – one for roll racing and one for street. For roll racing, I have a pair of Street Pro 15x10s with 295/55R15 Mickey Thompson rubber, while the street wheels are Simmons FR1s – 20×10 on the rear and 18×8 on the front. I’m a qualified painter, so I did all the bodywork and paint myself; the colour is Range Rover Silicon Silver. I also did the interior myself, just to get it on the track sooner, but I’ll definitely be looking to get a full custom retrim down the line. The car is now 95 per cent complete, with only a few bits and pieces to go.”


Got a sweet ride that’s currently in the build and want to share it with our readers? Email photos of it (2MB+ each) along with some details on the build to inthebuild@streetmachine.com.au.

Comments