Finding a sweet Mustang to restore used to be a fairly simple task. Two decades ago, they were everywhere, but nowadays the well is starting to run dry. Especially if you want one of the early fastbacks, as Brian Galea discovered when he went looking for an elusive coupe pre-COVID.
First published in the October 2026 issue of Street Machine

“I wanted to buy a project car, and I’ve always loved the iconic silhouette of the early Mustang fastback,” Brian says. “So, I rang a few guys, and importers as well, trying to find one. They have scouts over there, and when I told them what I was after, they were just laughing at me. They’d go, ‘Mate, for you to find a ’66 fastback in project form, good luck’.”
Thanks to the wonders of the internet, Brian did eventually find a V8 fastback tucked away in a Californian barn, but describing it as a “project car” would be like saying the Titanic was “slightly damp”

“The car was in a barn and had just sat there for 25 or 30 years,” Brian says. “It was vandalised – some kids had got into the barn; the car was against one wall and they smashed all the left side. It must have been a baseball bat or a metal pole, and they jumped on the roof, jumped on the bonnet, smashed all the glass. It was destroyed.”
Despite the Mustang’s tragic state, Brian had enough photos to see that it had good bones, so he sent the money over and had the car shipped to Australia. It could have gone horribly wrong, but fortunately, the fastback arrived on our shores looking exactly as advertised. Brian’s wife, on the other hand, thought that he’d gone crazy when it arrived in their driveway.



“We had a guy from Melbourne unload it from the container and then bring it up to our place in Sydney. He came at five o’clock in the morning, and I live in a very quiet area, so I got him to drop it down the road, and I got my young bloke, who was eight or nine at the time, to steer the car while we pushed it up the street back home. The front windscreen was all smashed, so he couldn’t see, but he had fun.”
At the time, Brian was midway through some house renovations, which he knew he’d have to finish before he could even glance at the Mustang. So, for the next few years, the fastback sat in the home garage, covered in boxes and other junk, while Brian quietly collected parts for the build. Then the global pandemic hit, and all of a sudden, he had plenty of time to make a start on the car.

“No cars on the road means no work,” Brian says. “It gave me time to do this. I spent five months on it – every day, seven days a week.”
Having his own workshop, BNJ Premium Repairs in Wetherill Park, gave Brian a massive advantage over the average COVID build, and he started by stripping the car to a bare shell with the help of his son, Jorden.
“I was the first person to pull that car apart since it was manufactured,” Brian says. “When I took all the door trims off, it still had the factory wax paper on it. Never disturbed.”


Starting with a complete original car was a massive plus, but the damage and rust it had sustained meant that all of the factory sheet metal had to go – and we do mean all of it! Brian has reskinned the entire car using Dynacorn panels: rear quarters, roof turret – the lot. He also took the time to tweak the rear wheel tubs, adding a bit of width to the rear so he could squeeze those custom 18x8in TSM rims under the bum.
It’s a massive amount of work to re-skin a car, but given the cost of a pristine shell these days, it’s one that’s well worth the effort when it yields a result like this. Just look at the fit and finish of this car; every curve and join is pure perfection. But if you think this is just a cookie-cutter build using off-the-shelf repro parts, you couldn’t be more wrong.

Check out the interior, beautifully crafted by Gary’s Motor Trimming. Brian tore the original seats down to the frames and rewelded them before getting them blasted and handing them over to Gary for new cushioning and extra bolstering on the sides.
“There’s six hides of leather in that car,” Brian says. “My wife wanted a debossed logo in the leather with the horse design. So, I found the size that she was after and made a two-sided die to do it.”

Brian makes it sound simple, but the process took several months of trying different dies, temperatures and pressures to make the perfect impression. “The first test ripped through the leather,” he laughs. “The edges were too sharp, and I couldn’t have them too round because you won’t get that nice distinct white around the edges.” Eventually, though, he got it right, and after letting the final test sit for several months to see how the logo would hold up, he presented it to Gary for inspection.
“He was impressed,” Brian says. “But I’ll never forget, he said, ‘I’m gonna give you the four bits of leather for the seats – don’t fuck it up.’ I embossed them over a couple of days and sent them over to him.” Looking at the results, you can see that Brian definitely didn’t fuck it up, and the rest of the car exhibits the same level of perfection.




Lowered three inches over Bilstein shocks and springs, the Mustang looks amazing covered in PPG Vintage Burgundy, and with a 347ci stroker replacing the original 289ci Windsor, it’s got the power to go with the looks. Add the four-wheel disc brakes and you’ve got the perfect street package.
Or so you would think; apparently, getting the car engineered took a little back and forth. “I thought the engineer was going to really tear the left-to-right conversion apart, but brakes were a big thing,” Brian says. “I’ve got vented rear disc brakes, and he goes, ‘It’s overkill. Your brakes at the back are way too big.’ Also the way it was lowered, because it’s lower than what it should be. So, we had to muck around with that, and the exhaust was just 5dB too loud.”

Eventually Brian got the whole car signed off and debuted it at the Sydney Hot Rod & Custom Auto Expo in 2025, where the fastback scored a bunch of trophies in the Modified Street Machine category, including Top Engine Bay, 2nd Top Bodywork, 2nd Top Coupe, and 3rd Top Paintwork. Whew! Not bad considering the build went right down to the wire.
“We only just finished it – I think it was the day before, literally,” Brian admits. “The wheels came down from Queensland the night before, and the centre caps were wrong, so he Express Posted them and they came that morning.”

Now it’s done, all that’s left is to drive it and enjoy the experience, and Brian’s getting a handle on that. “The secondaries haven’t even opened up yet; it’s a pretty healthy engine. Trust me, I’m just using the primaries, because I hit 100km/h within about three seconds, I reckon,” he says.
Sounds like a blast, and the end to a perfect build.

BRIAN GALEA
1966 FORD MUSTANG FASTBACK
| Paint: | PPG Vintage Burgundy |
| ENGINE | |
| Brand: | 347ci Ford Windsor V8 |
| Induction: | DRP high-rise intake, 750cfm Brawler carb |
| Heads: | DRP alloy |
| Camshaft: | Hydraulic-roller |
| Pistons: | Forged |
| Crank: | Steel |
| Oil pump: | High-volume |
| Fuel system: | Holley electric pump |
| Cooling: | Copper three-row radiator |
| Exhaust: | Custom 1.5in headers, 2.5in mandrel-bent stainless system |
| Ignition: | Electronic |
| TRANSMISSION | |
| Gearbox: | C4 |
| Converter: | 3000rpm |
| Diff: | 9in, LSD, 3.5:1 gears |
| SUSPENSION & BRAKES | |
| Front: | Bilstein springs and shocks, 3in lowered |
| Rear: | Bilstein springs and shocks, 3in lowered |
| Brakes: | DBA slotted discs, Kelsey-Hayes calipers (f & r) |
| Master cylinder: | XY GT |
| WHEELS & TYRES | |
| Rims: | TSM Forged; 18×7 (f), 18×8 (r) |
| Rubber: | Michelin Pilot Sport 5; 215/40R18 (f), 235/40R18 (r) |
THANKS
BNJ Premium Repairs; Chris at Veltech Automotive; Hi-Tec Body Repairs; Gary’s Motor Trimming; Warren Lewington (electrical); Craig’s Automatics; Advanced Performance Machining; TSM Forged; Leo at MCR; big thanks to my wife and son for their input in the design and assembly
Comments