“When I built this thing, I was hoping for 1000 engine horsepower,” he says. “But when you’re getting over 1100hp through a Turbo 400 and nine-inch, we must be pushing 1400hp now.”
It all started with a ProCharger kit that Brad picked up off a guy who had never got around to using it; it was an older F-1R model and came with a crank support, and he managed to pick it up for a fair discount.
First published in the October 2026 issue of Street Machine

“I bought it off a guy who worked with DNA Motorsport to develop that crank support and blower bracket,” he says. “He told me he was into it for nearly $12,000, and that was a lot of money 15 years ago.”
As he didn’t want to chop up the engine bay of his XA coupe, Brad chose to go with a Clevo set-up. But getting big horsepower out of a factory Clevo block these days can take a bit of trial and error, so he talked to Zoran at Competition Engines, who just happened to have the last few Arrow blocks in his possession.
The block was originally built up as a 410ci combo with a Scat crank, Oliver rods and JE pistons, to which Zoran also added larger Crower Hippo 0.937in lifters on a Comp Cams solid-roller with 260°/266° duration at 0.050 on a 114° lobe separation. The top end has a pair of CHI 3V 242cc heads with T&D shaft rockers, and a matching CHI intake drilled for FuelTech injectors and a 105mm throttlebody on a Tremaniac Racing CNC billet elbow.



Going over half an inch larger on the lifter diameter is all about engine longevity, according to Brad. “It slows your roller rpm down, and according to Zoran, makes the things live for a hell of a lot longer,” he explains.
Originally, the engine was run in on the Competition Engines dyno naturally aspirated, where it made 647hp, before it was packaged up and sent to Queensland for Brad to install into the Falcon.
With Rockynats approaching and plans to unveil the car at the event, Brad finished getting the XA together and threw it on a hub dyno to tune the combo for a possible shot at Rockynats Champion. That’s when disaster struck. A fuel pump issue caused a lean-out as they were completing the 98-octane tune. The engine had made 900hp on the hubs, but with two damaged pistons, Brad’s dream of Rockynats glory was over.



With Zoran’s blessing, Brad had the engine freshened up locally by Ray Honfay at Straightline Performance, and with slightly larger RaceTec pistons, capacity has been punched up to 417ci.
The plan moving forward is to fit EGTs into the Competition Engines-built headers, and with a fresh fuel system, they’re planning to see how it goes on E85. Then after a few more shows, it’ll be off to the races.
“I’ll definitely race it,” Brad says. “At the moment, people want to see it at the shows, but after 18 months of cruising around, you’re old news. That’s when I’m going to start racing it. I’d like to do some no-prep and some drag-and-drive.”
Sounds like a solid plan to us.
CHARGE!

To get the ProCharger mounted on the Cleveland, Brad made some changes to the bracketry to move the blower slightly up and out to clear his billet rocker covers – a pretty common issue with ProCharger set-ups. However, he also had to make sure it cleared the bonnet and engine bay. “I really didn’t want to cut up the beautiful engine bay that Pat from Pat’s Pro Restos painted for me,” Brad says.
Comments