One man’s 20-year quest to ensure you take your final cruise in style
First published in the November 2016 issue of Street Machine
As well as being a sad occasion, a funeral serves as a celebration of someone’s life – so why shouldn’t you get in on the action when it’s your time to go? I mean, why spend a lifetime cruising in style only to drop the ball when you cruise off this mortal coil? When it comes to my final ride, I sure as hell would choose the riotous impact of deep black paint and six grumbling exhausts over sleepy white serenity any day, and what better way to leave this world on a high than with Hot Rod Funerals.
Owner Bruce Varley is a car guy to the core, and toyed with this business concept for a number of years: “It’s been nearly two decades since I came up with the idea for a funeral service specifically targeted at car enthusiasts,” he says. “The end product took a lot longer than anticipated, but I can finally see the light!”
Bruce’s service offers an HK Brougham mourning coach dubbed Christine, and a matching crazy six-wheeled Brougham-spec hearse christened Gloria – two beautiful ladies that provide fitting funeral transport to honour the life of any car-mad patron.
If you think these Holdens ooze a typically 70s and 80s custom flavour, then congratulations on failing the restorers’ test. Not only is this style Bruce’s forte, but both cars have been in his possession since the 1970s, so are a legitimate time-warp from that bygone era.
“I bought the Brougham sedan back in ’76, and man it was rough,” Bruce says. “I replaced the rusty doors, fitted the GTS guards and bonnet, then used it as a second car for many years. In 1983 it was time to get serious, so my mate Tony Hughes and I designed and built an extensive bodykit using a mix of fibreglass and steel.”
The door handles were shaved and twin Jag fuel fillers added, before Bruce’s mate Pommy Dave laid down multiple coats of Dulon Midnight Black acrylic – this was the 1980s, remember. “I totally ran out of money and time so the car sat there unfinished for years,” Bruce explains. “The paint wasn’t cut back and buffed until 1999!”
A 350 Chev replaced the factory 307, still mated to the original Powerglide and Salisbury diff, with the stock brakes rebuilt and suspension tweaked to include the obligatory lowering job and chrome tramp rods.
Custom-made 13×7 and 15×10 chrome Pro Stock rims were fitted and decked out with BF Goodrich T/As in 215/50 and 295/50 sizes – white lettering to the spectator side of course!
Bruce completed a small business qualification in the late 90s, and the Brougham would spend the next 15 years earning its keep as a wedding and formal car, its rich black paint and original single-layer flame job making it a stand-out ride. But there was still that itch that he needed to scratch – the dream to create a fleet of funeral-spec cars that offered a very specific experience. So as soon as the Brougham was up and running, Bruce set to work on a stablemate that would be a cool 16 years in the making.
“I had a Holden panel van that I’d owned since 1972,” he says. “Back then every 17-year-old had to have a van, so I bought a stolen and stripped HT from the auctions and spent the next few years piecing it together.
It went from a pov-pack, damaged 161 Belmont to a 350 Chev-powered hottie with GTS guards and bonnet, bubble windows and flared guards. It was my daily driver for years.”
Transforming the van into a hearse meant that extra, er, leg room was required, so a donor HK panel van was purchased to help create a long-wheelbase six-wheeler to provide both ample coffin space and serious in-yer-face impact.
“I cut the HK first for a practice run, then wheeled the HT into the shed. It was a nerve-wracking experience, and with grinder in hand I could only mutter: ‘Here goes nothing!’” Bruce laughs.
Bruce stretched the HT three-and-a-half feet in total, adding the HK rear cut and banjo-based lazy axle assembly to create a seriously wild look, not seen on our shores since the 80s builds of Lindsay Gesling’s Peter Arcadipane-inspired ‘40 Acres’ tandem HJ van and Siggy Veit’s LE Monaro ute.
Bruce decided early on that the cars had to match each other as closely as possible, so he began by replicating the Brougham’s bodykit for the hearse, adding an extra 20 pieces to compensate for variations in size and shape. A one-piece swinging tailgate was fabricated and the side panelling modified for the fitment of six-foot gullwing-style windows, allowing easy access to the coffin deck for trouble-free transfer.
The deck fittings were sourced from Canadian hearse supplier DNR Industries, and from a specialist hearse wreckers based in the US – yep, only in the States.
As a toolmaker by trade, creating the solid brass work was a cinch for Bruce; he made the hinges, roof racks, door plaques and cast wheel spinners before polishing and clear-coating each piece to ensure a permanent shine.
With the vast amount of fabrication and body mods completed, jack-of-all-trades Bruce laid down the spray putty and primer coats before Pete D’Aguar sprayed on umpteen litres of glorious black acrylic. Pete then teamed up with artists Jamie Goodhew and Alan Smith to create the dual-layer flames in red and gold. Chrome Pro Stock rims were fitted to match the sedan’s rolling stock, with an extra pair of 15s nestled under the rear.
By the time the hearse was finally nearing completion after 16 years, Bruce realised the Brougham was showing its age from use over the same period, so he set out to ensure that both cars were unveiled together in pristine condition.
Glen from A&J Smash Repairs freshened the sedan’s black paint before matching flames were added, differing from the hearse’s paint scheme only in the choice of silver and blue hues.
Vehicle reliability and comfort are paramount in the funeral industry, so Bruce chose to install fresh 290hp 350 Chev crate motors and rebuilt Powerglide transmissions in both vehicles, with air conditioning and power steering included for good measure.
SAAS bucket seats replaced the original Brougham front bench, which was instead fitted to the hearse, and the interior surfaces of both cars were retrimmed in black crushed velvet by Bruce and Mascot Motor Trimmers.
In both cars, the stock dash fascia along with custom floor and overhead consoles house a mix of Monaro, Brougham and Smiths gauges, complemented by a Brougham tiller and Hurst shifter.
“Sixteen years is a long time for any project,” Bruce admits, “but that’s what happens when you try and do everything yourself. At the end of the day I owed it to my old van to get it back on the road, and also to myself to make that 20-year dream a reality.”
Hot Rod Funerals finally came to fruition in 2015, with Bruce and his team quickly earning a reputation in the greater Sydney area for professionalism and the ability to provide a unique experience. Check out Hot Rod Funerals on Facebook for more information or keep an eye out for Bruce and these Holdens at many local shows; he remains a hot car enthusiast first and foremost, so you can rest assured that your loved one’s last wild ride will be in safe and understanding hands.
BRUCE VARLEY
1970 HOLDEN HT HEARSE
Colour: | Midnight Black |
DONK | |
Make: | Chevrolet 350ci |
Block: | Factory cast |
Crank: | Stock |
Rods: | Stock |
Camshaft: | Mild hydraulic |
Heads: | Standard cast |
Intake: | 350 HT Monaro |
Carb: | Holley 650cfm |
Ignition: | 350 HT Monaro distributor, Mallory coil, Accel leads |
Exhaust: | Genie extractors, twin 2in system, custom side tips |
SHIFT | |
Trans: | Powerglide |
Diff: | Salisbury 10-bolt, 3.36 gears; Banjo lazy axle |
UNDERCARRIAGE | |
Front: | Holden wishbone, 2in lowered coils |
Rear: | Reset modified leaf springs |
Shocks: | De Carbon (f), air shocks (r x2) |
Brakes: | Holden discs (f), Holden drums (r x2) |
MAGS & RUBBER | |
Rims: | Custom Pro Stock chromies; 13×8 (f), 15×10 (r x2) |
Tyres: | BF Goodrich T/A; 235/50 (f), 295/50 (r x2) |
BLING | Six-wheel body stretch; flared guards, skirts, front and rear spoilers; one-piece tailgate; shaved door handles; dual skyports; twin Commodore fillers; velocity stack; extensive chrome-plating and paint detailing; polished timber and black crushed velvet interior, custom brass work |
BRUCE VARLEY
1968 HOLDEN HK BROUGHAM
Colour: | Midnight Black |
DONK | |
Make: | Chevrolet 350ci |
Block: | Factory cast |
Crank: | Stock |
Rods: | Stock |
Camshaft: | Mild hydraulic |
Heads: | Standard cast |
Intake: | Edelbrock |
Carb: | Holley 650cfm |
Ignition: | Mallory twin-point distributor, Mallory coil, Accel leads |
Exhaust: | Genie extractors, twin 2in system |
SHIFT | |
Trans: | Powerglide |
Diff: | Salisbury 10-bolt, 3.08 gears |
UNDERCARRIAGE | |
Front: | Holden wishbone, 2in lowered coils |
Rear: | Reset leaf springs |
Shocks: | De Carbon (f & r) |
Brakes: | Holden discs (f), Holden drums (r) |
MAGS & RUBBER | |
Rims: | Custom Pro Stock chromies; 13×7 (f), 15×10 (r) |
Tyres: | |
BLING | Flared guards, skirts, front and rear spoilers; shaved door handles; dual skyports; custom flame paint; velocity stack; extensive chrome-plating and paint detailing; black crushed velvet interior |
Comments