Cameron Baylis’s 1987 Holden VL Calais

Piece by piece, Cameron Baylis’s VL Calais build went in a totally NEW direction

Share
Photographers: Ben Hosking

The global pandemic we collectively refer to as COVID-19 was a crazy time, affecting us all in some way or another. But while some of us spent lockdown getting slaughtered online playing Call Of Duty against 14-year-olds, others, like Sydney’s Cameron Baylis, were making more positive uses of their time – like starting the build on this amazing VL Calais.

First published in the November 2026 issue of Street Machine

“I bought the car during COVID,” Cameron says. “I was just bored at home, looking for something to do. It was meant to just be something I tidied up at home and do myself, but things got a little bit out of hand.”

Cameron has had a long affiliation with VL Commodores, going back to when his parents bought a Walkinshaw when he was just a year old. So, it’s no surprise that a VL, and a Calais in particular, was at the top of his list when it came time to find a project. However, being in lockdown, Cameron couldn’t go and inspect the car himself.

“I found it on Gumtree,” he recalls. “The car was in the country, down near Canberra. So, I sent a mate of mine who’s got a tow truck to pick it up, sight-unseen. It was an original, one-owner car – probably too good to do what I did to it!”

With the factory white-over-silver Calais already in very good original condition, Cameron’s plan was to put a nice set of wheels on it before swapping in the driveline from his flood-damaged VE Senator. But that plan got sidetracked in a big way when he decided to tub the rear end.

“I had a set of wheels made for the car, but they didn’t end up fitting,” Cameron says. “So then the tubs started, and the rear end started, and it just rolled on from there.”

We’ve all been there: you change one thing, which affects another thing, and once the dominoes start to fall, you’re waist-deep into a full rebuild. That’s where Cameron found himself, so he figured, now that the tubs and diff were done, why not just go all in?

“I did this build so backwards,” he admits. “I painted the car first, but if I was to ever do it again, it wouldn’t happen in this order! Everyone had to work around my paintwork, and I was anal about it getting scratched.”

To get the build into full swing, Cameron sent the Calais to Stephen at 2 Wish 4 Customs in Hawkesbury to cop a closed-door respray, but that escalated quickly when the decision was made to tidy up the engine bay. That led to deleting the door locks and fuel filler and a full colour change, so why not add an LE bodykit to the car while they were there? Just like that – click, click, click – those falling dominoes started building up speed.

While Stephen was handling the body, Cameron decided to hand the VE Senator’s 6.2-litre LS3 to former SMOTY winner Ed Brodie at Ed Brodie Race Engines to give the alloy small-block a bit more pep. But when they tore the engine down, they discovered that the flood waters hadn’t just damaged the car’s interior. The engine had copped a lungful as well, and while the block was saveable with an overbore, they decided to replace all the internal parts.

“Ed and my old man have been mates since I was a young kid,” Cameron says. “Ed built some super-tough motors for him back in the day that were, in their time, some of the quickest Holden engines on the street.”

An LS3 is a solid place to start a performance engine build, and Ed has made that even better with a Callies crank and rods package, which, combined with some CP pistons, took the capacity out to 416ci. The heads were given a Higgins CNC port job and filled with all the best bits, and they were fitted along with a ported intake and a custom Kelford cam to make the most of the combination. Oil pressure and capacity have been upgraded thanks to a Melling HV oil pump and a larger baffled ASR oil pan.

The stout mill has been bolted to a fully built Turbo 400 with a 4200rpm TCE converter, which feeds power back to a 3.9-geared nine-inch. All in all, it’s a solid package – more than enough to put the wind up anyone cruising the wild streets of Western Sydney.

Building the pipes was a bit of a nightmare for Chris at Castle Hill Exhaust, as the car was fully painted at this point, but the stepped headers came out perfectly regardless. They feature 17/8-inch primaries at the flange, stepping up to two inches, before merging with four-into-one collectors that flow into a twin three-inch system with Hooker Aero Chamber mufflers and resonators. The whole system was built out of mandrel-bent tubing, which was then TIG-welded together before being completely ceramic-coated by Comp Coat Race Coatings in Granville. Anyone who has done a full exhaust system knows that’s a huge amount of work right there.

Everyone hates wiring, so Cameron had Justin at JD Auto Electrical handle the installation of the Haltech Elite 2500, iC-7 dash and the various sensors, along with the massive Pioneer screen in the middle of the dash.

With the bodykit fitted, the paint done, and the driveline and exhaust installed, it was down to the plumbing and interior as the clock counted down to Meguiar’s MotorEx 2026, where Cameron intended to debut the car. Over the course of the build, he had moved house several times, and with just an average suburban garage to work in, he shipped the car over to PSC Racing, where Mark and team sorted out the final fit-up.

Cam reckons the car wouldn’t be the same without those guys. Using the entire catalogue from Lowe Fabrication, the PSC crew hid everything from sight and covered the bits that couldn’t be hidden with polished billet pieces. “They went over the whole car, making sure it was up to scratch and not done half-arsed,” Cameron says. “I think if the car didn’t end up in Mark’s shop to smash it out and have it ready to be picked up and driven onto the tow truck, it’d be sitting stagnant in a shed still waiting to be finished.”

Down in Melbourne at MotorEx, Cameron decided against unveiling the VL, electing to display it openly right from the start – mainly because he didn’t want to stand up there in front of thousands of people talking about the car! After all, this Calais was always meant for the streets, so there were no mirrors or fancy axle stands; just a clean piece of carpet and a display borrowed from Damien Lowe at Lowe Fabrications.

But the car stood out just the same. Throughout MotorEx, we watched the crowds ogling the engine bay and boot, which were the only panels Cameron opened all weekend.

Since then, he’s done the Hot Rod & Custom Auto Expo at Rosehill, and there are plans to do the Adelaide Auto Expo and Street Machine Summernats, but that’ll probably be the limit of the car’s show career.

“From there, it’ll be a full-blown street car,” Cameron declares, and that’s the point where he’ll decide whether the Calais needs more power. “Look, don’t get me wrong, it goes good for what it is,” he says. “But these days, everyone’s got a thousand horsepower on the street. You don’t need it, but it’d be nice to have it!”  

CAMERON BAYLIS
1987 HOLDEN VL CALAIS

Paint:PPG Custom Bronze
ENGINE
Brand:416ci GM LS
Induction:LS3 ported intake, 102mm throttlebody
ECU:Haltech Elite 2500
Heads:Higgins CNC-ported
Camshaft:Kelford custom
Conrods:Callies
Pistons:CP forged
Crank:Callies
Oil pump:Melling HV pump, ASR sump
Fuel system:Walbro 525
Cooling:South Coast Radiators, twin 12in Maradyne fans
Exhaust:Custom stepped heads, dual 3in system, Hooker mufflers
Ignition:MSD coils
TRANSMISSION
Gearbox:TH400, full-manual, reverse-pattern
Converter:TCE 4200rpm
Diff:9in, Strange centre, 3.9:1 gears, 35-spline Moser axles
SUSPENSION & BRAKES
Front:Custom coil-overs
Rear:Custom four-link, Strange double-adjustable shocks
Brakes:Wilwood discs and six-piston calipers (f), VL Turbo discs (r)
Master cylinder:VT Commodore
WHEELS & TYRES
Rims:Weld V-Series 17×4.5 (f), Max Wheel beadlock 15×10 (r)
Rubber:Nankang Cross Sport SP-9S 165/70R17 (f), Nankang Utility SP-7 275/60R15 (r)

THANKS
Stephen Darmody at 2 Wish 4 Customs; Ed Brodie at Ed Brodie Race Engines; Richard Vella at Active Automatics; Mick and the boys at Street Cred Differentials; Justin at JD Auto Electrical; Mark and the team at PSC Racing & Automotive; Marcus at Max Wheel; Chris at Castle Hill Exhaust; Damien at Lowe Fabrications; my partner and family for listening to me daily about anything related to the build

Comments